Elscint recently manufactured and supplied a 6 outlet bowl feeder to Romania. The part to be fed was a metal insert having dia 6 mm x 15 mm length. One end was having a smaller diameter (dia 4 mm) and the requirement was to get the smaller side forward. As the number of outlets were 6, Elscint used Model 400 with a 700 mm diameter cast aluminium bowl, coated with Elscinthane PU coating. The bowl track width was 50 mm and the parts were then taken forward in a tube. As there were 6 outlets, it was imperative that proper overflow arrangement was provided for each outlet. Further, flexible see through transparent tubes, each having length of 2 mtrs. were attached to each outlet. The bowl feeder was shipped to Romania by air freight. The speed achieved was 25 to 30 parts per minute per outlet, more than the requirement of the customer. You can watch the video of the equipment.