MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


24 August, 2019

Vibratory Bowl Feeder for feeding caps and plugs

Elscint recently manufactured a set of vibratory bowl feeders, one for feeding caps and another for feeding of plugs. The requirement was to fit the plug on the bottle and then do the capping of the cap. The plug was having dimensions dia 16.40 mm x 10 mm height while the cap was having dia 30 mm x 28 mm ht. As the diameter and the height of the cap where almost equal, the caps used to come mostly in axial position. Hence, Elscint provided a step at a couple of places to make them standing. This improved the feed rate drastically and a speed of 180 caps per minute was achieved, without the use of air. The speed of the plug too was 180 plugs a minute with open side down orientation. Ahead of the bowl feeder, a 800 mm long linear track was provided for the plug while a gravity chute was provided for the cap. The equipment was built for flame proof application and supplied to an OEM manufacturer.

Monish Shete

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Leave a Reply

Your email address will not be published. Required fields are marked *