15 January, 2020
Elscint Vibratory Feeding System for Rubber Seals
Elscint, recently manufactured a feeding system for two types of rubber seals, one having size dia 10 mm x 8 mm height while the other was dia 11 x 8 mm height. The equipment consisted of a 10 ltr. Hopper tray mounted on Elscint Linear Vibrator Model LF I with a level controller for start
5 January, 2020
Feeding of glass tubes in a vibratory bowl feeder
Elscint, the leading vibratory bowl feeder manufacturer from India recently supplied a vibratory bowl feeder for feeding of small glass tubes. The diameter of the same was 2.5 mm and length 10 mm. The parts being very light, would not move by themselves. This required a special vibratory bowl feeder with strong vibrations to ensure
22 December, 2019
Vibratory Feeding System for Valve Plate
Elscint recently supplied 5 vibratory feeding system for valve plate which is a very small component having diameter 5 mm x 2.82 mm height with a small boss of dia 2 on one side. The requirement was to feed this component with the boss up further to a linear vibrator. Elscint supplied a feeding solution
15 December, 2019
Elscint Vibratory Bowl Feeder for Plastic Part
Elscint, recently a pad printing machine manufacturer approached Elscint that a bowl feeder purchased by them was not working properly with a wrong orientated parts coming out once every 20 components. The speed too was very less (50 parts per minute as against the requirement of 80 parts per minute). The manufacturer approached Elscint for
6 December, 2019
Elscint double outlet Elevator Feeder
Elscint recently manufactured and supplied two hopper elevators, each with 2 outlets for feeding of brass cartridges. The cartridges were having a minor diameter of 4.5 mm and major diameter of 6 mm while the length was 60 mm. This made the feeding quite difficult as the cartridges had a tendency of getting jammed between
22 November, 2019
Elscint renews CE Marking for its Vibratory Bowl Feeders & Linear Vibrators
Elscint, the leading Vibratory Bowl Feeder manufacturer from India has recently renewed its CE Marking. The new certification is from Techicka Inspekcia, a.s., Slovakia. The technical file of the equipment has been issued according to EN ISO/IEC 17020 (Machinery Directive – Electrical Equipment of Machines) and EN ISO 12100 (Safety of Machinery). It implies that
13 November, 2019
Elscint Vibratory Bowl Feeder for Oil Seals
Elscint, recently completed a project where the requirement was to feed 3 types of oil seals with orientation. The difference between both the faces was very less wherein only a small flash was present on one side while the other side did not have any. The flash too was not consistent. Due to this difficulty,
3 November, 2019
Elscint Vibratory Bowl Feeder for feeding small Pins
Elscint, recently completed a project where the requirement was to feed small pins having diameter of just 1.62 x 18.50 length. One end of the pin was flat while the other was slightly conical. The customer wanted one bowl feeder with the flat end forward while the second one was required with the conical side
25 October, 2019
Feeding of Ceramic Rings for Vision Inspection
Elscint, recently completed a project where the requirement was to feed Ceramic Rings having diameters ranging from dia 20 mm to dia 75 mm and having thickness from 4 mm to 12 mm at a very high speed. The rings were to be fed to on a belt conveyor for vision inspection at a high
14 October, 2019
Elscint Vibratory Bowl Feeder with Elevator for Forged Part
Elscint recently manufactured and supplied a vibratory bowl feeder with a hopper elevator for feeding of three types of forged parts having diameters, dia 34, dia 36 and dia 40 mm, while the respective heights were 35 mm for the first two types and 39 mm for the third size. One side of the part