Elscint Vibratory bowl feeder for Plastic Parts

Elscint recently completed a project where in the requirement was for feeding of two plastic parts (one male and one female) in separate bowl feeders. Both the parts were having a flange of dia 25 mm and stem of dia 6 mm (for male part) and dia 10 mm (for the female part). The male part was to be fed with the stem up while the female was required to be fed with the stem down. Ahead of the bowl feeder, each of these required linear vibrators with 500 mm long tracks to take the parts upto the assembly machine of the customer. The speed required was 80 parts per minute for each of these with the correct orientation. In fact, the customer had bought 2 similar sets, once in 2006 and once in 2011. These was the third requirement. Accordingly to the customer, the previously supplied bowl feeders were working very smoothly without any problem and maintenance for more a decade, proving the customers confidence in Elscint Automation’s products.

As the parts were relating to medical devices, the bowls were made in stainless steel. Elscint used step design Model 400 bowls for this application. The linear vibrator used was Model LF I, same as previously supplied.

Monish Shete

Monish Shete is CEO of Elscint India Pvt Ltd (formerly Elscint Automation), a 40 year old company manufacturing vibratory bowl feeders, Rotary / Centrifugal Feeding Systems and similar small part handing products. He personally has more than 25 years experience with last 20 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog. Do subscribe to get this thrice a month.

Leave a Reply