Elscint recently manufactured and supplied a high speed vibratory bowl feeder for feeding of metal pins to a company in the USA. There were various sizes of pins having head size 2.8 mm to 3.6 mm and tail size 1.2 mm to 1.8 mm. The length varied from 14.50 mm to 19.50 mm. The orientation required was head up and expected speed / feed rate was 250 parts per minute. The major requirement was that there should be ease of adjustment between the various sizes. Elscint provided a very versatile tooling for this purpose, which made the changeover very easy. The speed or feed rate achieved was between 300+ parts per minute. Elscint also supplied the linear vibrator with a track of 400 mm length along with controllers for the bowl and the linear vibrators. A sensor was placed on the linear track to switch on / off the bowl feeder when the linear track was full. As the equipment was to be shipped to the USA, it was to run on 110 V / 60 Hz supply. This was made possible with the special coils which Elscint manufactured. You can watch the video of the equipment.
Elscint supplies high speed Vibratory Bowl Feeder for feeding metal pins to USA
- Post author:Monish Shete
- Post published:September 23, 2017
- Post category:Vibratory Bowl Feeder
- Post comments:0 Comments
Monish Shete is CEO of Elscint India Pvt Ltd (formerly Elscint Automation), a 40 year old company manufacturing vibratory bowl feeders, Rotary / Centrifugal Feeding Systems and similar small part handing products. He personally has more than 25 years experience with last 20 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog. Do subscribe to get this thrice a month.