Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325

Follow us on

22 July, 2017

Elscint Vibratory Bowl Feeder for Scoops

Elscint recently manufactured a unique Vibratory Bowl Feeder for feeding of Plastic scoops. It was designed in such a manner that with slight adjustment, various sizes of scoops can be fed through the same. A Stainless Steel fabricated Bowl was used for this purpose. . In case of scoop feeding, not only is the Orientation

Learn More

28 May, 2017

Feeding of small Rubber Part

Elscint recently manufactured a small vibratory bowl feeder for feeding of a very small rubber part which required very critical orientation. By using a machined track for the same, Elscint achieved 100% correct orientation and also ensured the required speed of 100 parts per minute per track was achieved easily. The rubber part had a

Learn More

13 March, 2017

Elscint Vibratory Bowl Feeder for small springs

Elscint recently manufactured a miniature vibratory bowl feeder for feeding of small springs having diameter 5 mm and length 11 mm. Feeding of springs is very complicated as they have a tendency of getting entangled. However, the special bowl design developed by Elscint ensures that entangled springs do not come forward but also get disentangled.

Learn More

4 March, 2017

Elscint Vibratory Bowl Feeders for feeding, orientating, conveying and singulating valve seats and valve guide

Elscint recently manufactured three bowl feeders for feeding of valve seats and valve guide. There were four valve seats (two per set to be fed simultaneously) and a single valve guide. The requirement was to correctly orient the valve seats in a particular orientation. The difference was that the internal diameter had an inside chamfer

Learn More

14 December, 2016

Vibratory Bowl Feeder for feeding small tapered plastic caps

Elscint recently supplied a vibratory bowl feeder for feeding of small tapered plastic caps. The requirement was to feed the same in “open side down orientation” to the capping machine of the customer. The scope of supply included a vibratory bowl feeder, gravity chute with a sensor on the same to switch off the bowl

Learn More

14 November, 2016

Innovative Usage of Vibratory Bowl feeders – Feeding & Inserting of Small Pin into Regulator Housing

Elscint recently supplied and integrated a vibratory bowl feeder for feeding of a small pin having dia 2.5 mm x 4.5 mm length. The requirement was to not only feed these pins in axial orientation but to provide an escapement / singulator to release the same one by one into the regulator housing of the

Learn More