22 December, 2019
Vibratory Feeding System for Valve Plate
Elscint recently supplied 5 vibratory feeding system for valve plate which is a very small component having diameter 5 mm x 2.82 mm height with a small boss of dia 2 on one side. The requirement was to feed this component with the boss up further to a linear vibrator. Elscint supplied a feeding solution
15 December, 2019
Elscint Vibratory Bowl Feeder for Plastic Part
Elscint, recently a pad printing machine manufacturer approached Elscint that a bowl feeder purchased by them was not working properly with a wrong orientated parts coming out once every 20 components. The speed too was very less (50 parts per minute as against the requirement of 80 parts per minute). The manufacturer approached Elscint for
13 November, 2019
Elscint Vibratory Bowl Feeder for Oil Seals
Elscint, recently completed a project where the requirement was to feed 3 types of oil seals with orientation. The difference between both the faces was very less wherein only a small flash was present on one side while the other side did not have any. The flash too was not consistent. Due to this difficulty,
3 November, 2019
Elscint Vibratory Bowl Feeder for feeding small Pins
Elscint, recently completed a project where the requirement was to feed small pins having diameter of just 1.62 x 18.50 length. One end of the pin was flat while the other was slightly conical. The customer wanted one bowl feeder with the flat end forward while the second one was required with the conical side
25 October, 2019
Feeding of Ceramic Rings for Vision Inspection
Elscint, recently completed a project where the requirement was to feed Ceramic Rings having diameters ranging from dia 20 mm to dia 75 mm and having thickness from 4 mm to 12 mm at a very high speed. The rings were to be fed to on a belt conveyor for vision inspection at a high
15 September, 2019
Four outlet Vibratory Bowl Feeder for very small Springs exported to Canada
Elscint recently manufactured a vibratory bowl feeder for feeding of springs in four outlets. The diameter of the spring was just 2.3 mm and the length was 9 mm. The wire diameter being just 0.8 mm, these springs had a tendency of getting entangled between themselves. However, Elscint designed the bowl in such a way
3 September, 2019
Two outlet vibratory feeder for feeding assembled chain links
Elscint recently manufactured a vibratory bowl feeder with two outlets for feeding of chain links for inspection and stacking. The chain links were required to be oriented in a particular manner and the centre distance between the two outlets was required to be 110 mm in the X axis and 80 mm in the Z
24 August, 2019
Vibratory Bowl Feeder for feeding caps and plugs
Elscint recently manufactured a set of vibratory bowl feeders, one for feeding caps and another for feeding of plugs. The requirement was to fit the plug on the bottle and then do the capping of the cap. The plug was having dimensions dia 16.40 mm x 10 mm height while the cap was having dia 30 mm x
16 August, 2019
Elscint high speed Vibratory Counting System for heavy parts
Elscint recently manufactured a high speed vibratory counting system for various heavy parts for a South Indian customer. The parts to be counted were heavy alumimium castings. Various parts were to be accommodated in the same equipment, right from diameter 20 mm to diameter 60 mm and length varying from 30 mm to 120 mm.
6 August, 2019
Vibratory Bowl Feeder for feeding rectangular Rubber Seals
Elscint recently manufactured a vibratory bowl feeder for feeding of rectangular rubber seals having size 12.5 x 9 x 5.50 mm thk in two rows at a particular centre distance. The requirement was for feeding of 120 seals per minute per row. Elscint used its model 250 for this purpose with a cast aluminium bowl