Profile
Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.
Website :http://elscintautomation.com/wp
Posts by Monish Shete
15 December, 2019
Elscint Vibratory Bowl Feeder for Plastic Part
Elscint, recently a pad printing machine manufacturer approached Elscint that a bowl feeder purchased by them was not working properly with a wrong orientated parts coming out once every 20 components. The speed too was very less (50 parts per minute as against the requirement of 80 parts per minute). The manufacturer approached Elscint for
6 December, 2019
Elscint double outlet Elevator Feeder
Elscint recently manufactured and supplied two hopper elevators, each with 2 outlets for feeding of brass cartridges. The cartridges were having a minor diameter of 4.5 mm and major diameter of 6 mm while the length was 60 mm. This made the feeding quite difficult as the cartridges had a tendency of getting jammed between
22 November, 2019
Elscint renews CE Marking for its Vibratory Bowl Feeders & Linear Vibrators
Elscint, the leading Vibratory Bowl Feeder manufacturer from India has recently renewed its CE Marking. The new certification is from Techicka Inspekcia, a.s., Slovakia. The technical file of the equipment has been issued according to EN ISO/IEC 17020 (Machinery Directive – Electrical Equipment of Machines) and EN ISO 12100 (Safety of Machinery). It implies that
13 November, 2019
Elscint Vibratory Bowl Feeder for Oil Seals
Elscint, recently completed a project where the requirement was to feed 3 types of oil seals with orientation. The difference between both the faces was very less wherein only a small flash was present on one side while the other side did not have any. The flash too was not consistent. Due to this difficulty,
3 November, 2019
Elscint Vibratory Bowl Feeder for feeding small Pins
Elscint, recently completed a project where the requirement was to feed small pins having diameter of just 1.62 x 18.50 length. One end of the pin was flat while the other was slightly conical. The customer wanted one bowl feeder with the flat end forward while the second one was required with the conical side
25 October, 2019
Feeding of Ceramic Rings for Vision Inspection
Elscint, recently completed a project where the requirement was to feed Ceramic Rings having diameters ranging from dia 20 mm to dia 75 mm and having thickness from 4 mm to 12 mm at a very high speed. The rings were to be fed to on a belt conveyor for vision inspection at a high
14 October, 2019
Elscint Vibratory Bowl Feeder with Elevator for Forged Part
Elscint recently manufactured and supplied a vibratory bowl feeder with a hopper elevator for feeding of three types of forged parts having diameters, dia 34, dia 36 and dia 40 mm, while the respective heights were 35 mm for the first two types and 39 mm for the third size. One side of the part
5 October, 2019
Exporting to more than 60 countries
Elscint has been in the business of manufacturing special purpose feeding systems from the year 1983. However, since inception, it was catering only to customers in India with a negligible presence on the export front. The reasons for this were the scepticsism of most European / American customers about products from India as well perceptions
27 September, 2019
Elscint Vibratory Bowl Feeder with Elevator for Shaft feeding
Elscint recently manufactured and supplied a vibratory bowl feeder with a hopper elevator for feeding of hollow shafts having diameter 20 mm to dia 50 mm and length from 25 mm to 70 mm. The feeding was for a centerless grinding machine. The customer already had a conveyor and the parts had to be fed
15 September, 2019
Four outlet Vibratory Bowl Feeder for very small Springs exported to Canada
Elscint recently manufactured a vibratory bowl feeder for feeding of springs in four outlets. The diameter of the spring was just 2.3 mm and the length was 9 mm. The wire diameter being just 0.8 mm, these springs had a tendency of getting entangled between themselves. However, Elscint designed the bowl in such a way