27 August, 2017
Elscint recently manufactured a machine for feeding, laser marking and vision Inspection for a plastic component called Seal. It was a small plastic part with a single leg below and a arrow on the top. The arrow had to be oriented in one particular way, which was a major challenge. Secondly, the requirement was for
20 August, 2017
Elscint recently completed a project where in the requirement was for feeding of plastic caps in open side facing ground orientation. Along with the vibratory bwl feeder, a 800 mm long linear track was also required for conveying the caps to the assembly station of the customer. The speed required was 70 parts per minute.
Innovative Uses of Vibratory Bowl Feeders – Elscint Vibratory Bowl Feeders for segregation of M6 screws
7 August, 2017
Elscint recently manufactured a vibratory bowl feeding system for segregation of M6 screws having different lengths. There was a mix-up between M6 x 15 and M6 x 25 mm screws and the customer wanted an equipment to segregate them. The requirement was that after segregation, the respective sizes should be collected in separate bins. For