Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325

Follow us on


Archive for June, 2010

Feeder Bowls for the pharmaceutical / medical industry

24 June, 2010

In case parts relating to pharmaceutical or medical industry are required to be fed through a feeder bowl, certain points must be taken care of. First and foremost, the bowl needs to be manufactured in stainless steel (either 304 or 316 grade, as per customer requriement). Secondly, it should be full argon welded in such

Learn More

Leveling screws for mounting stands (for vibratory bowl feeders)

13 June, 2010

Using a leveling screw for mounting stands made for vibratory bowl feeders is useful in many ways. First and foremost, it helps in leveling the stand in case the floor is not flat enough. In case the floor is not properly leveled, then the vibratory bowl feeder will be remains tilted on one side. This

Learn More

Mounting Stands for Vibratory bowl feeders

6 June, 2010

The outlet height of a vibratory bowl feeder is between 100 mm to 500 mm, depending upon the model and the bowl used for the same. As a vibratory bowl feeder feeds to some machine or assembly operation, the required height, in the majority of the cases is more than this. Hence, there is a

Learn More