MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


16 September, 2018

Elscint Vibratory Bowl Feeder for small brass washers

Elscint recently completed a project where in the requirement was for feeding of small brass washers having size dia 3.5 x 1.5 mm thickness having burr on one side. The orientation required was the burr was to be always on the top side. The extent of the burr was different in most cases, making the bowl feeder quite challenging. However, the orientation of the same was achieved with a speed of more than 80 parts per minute. The component being very small, Elscint used vibratory bowl feeder Model 100 with a fabricated stainless steel bowl having diameter 120 mm. The orientation was done on the outer track of the bowl just before the components came out of the bowl. After the bowl, a linear track of 200 mm with Model Elscint VI was used. A stand too was provided for mounting these with an height adjustment of (+/-) 50 mm for ease of integration at the customer’s end. You can watch the video of this miniature vibratory bowl feeder.

 

Monish Shete

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Leave a Reply

Your email address will not be published. Required fields are marked *