MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on

archive.php

Posts Tagged ‘afag’


Next Page »

Innovative Usage of Vibratory Bowl Feeders – Vibratory Feeding System for Brake Liners

14 August, 2012

Elscint has developed a unique feeding system for feeding of brake liners of various sizes. The brake liners are semi circular and having various diameters and sizes, upto dia 120 mm or even more. All these can be fed through this unique system. This equipment consists of an Elscint Vibratory Hopper Feeder for bulk loading,

Learn More

Choosing the right track width for a bowl

12 May, 2012

While designing a bowl feeder, deciding upon the track width of the bowl is very important for the proper orientation and speed of the components. If the track is too wide with respect to the component size, then all the components would come up widthwise while in case the track width is too less, most

Learn More

Innovative Usage of Vibratory Bowl Feeders – Roller, Feeding, Orientation and Elevating Pump Unit with double outlets

2 May, 2012

Usually, for feeding and orientation of taper rollerscounter rotating motorized gauge rolls,are used. A vibratory bowl feeder feeds the taper rollers in axial direction, without reference to any particular side being forward or behind to a set of motorized gauge rolls. The inclination of the rolls, plus adjustable roll spacing from one end to the

Learn More

Innovative Usage of Vibratory Bowl Feeders – Vibratory Bowl Feeder for Sintered “E” Cores

22 April, 2012

Feeding of sintered parts presents a very tricky challenge in the case of vibratory feeders. The reason being that these are fragile and even a very small fall from the from the top of the bowl can break them. Due to this reason, a special type of lining / coating is required if these require

Learn More

Innovative Usage of Vibratory Bowl Feeders – Vibratory Bowl Feeder for Spoons

14 April, 2012

Feeding of spoons is a very tricky affair as most of the times they do not have a particular geometry whereby one can hold them. They can slip out due their inherent design. Hence, feeding of spoons is always difficult in a vibratory bowl feeder. However, it is possible to manufacture bowl feeders for feeding

Learn More

Innovative Usage of Vibratory Bowl Feeders – Vibratory Bowl Feeders for Conical Washer

2 April, 2012

Feeding of Conical Washers is not easy in a vibratory bowl feeder due to its very less thickness. In most cases, the thickness is just 0.6 mm to 0.8 mm. Due to its conical curvature, the washers have a tendency of coming in a bunch and it is difficult to remove one out of the

Learn More

Innovative Usage of Vibratory Bowl Feeders – Vibratory Counting System

13 March, 2012

A very important usage of vibratory part feeders is for accurately counting of small parts like plastic caps, spouts, screws, rivets, capsules and electrical connectors, bearings,  as well as heavy parts such as anchor bolts, bearing races and metal sockets. The standard equipment consists of a suitable vibratory bowl feeder, a sensing device and an

Learn More

Innovative Usage of Feeders – Half Bearing Feeding System

3 March, 2012

Feeding of half bearings or similar semi-circular parts is not easy and as these parts are very large in size, using a bowl feeder does not make since nor is it economical. Hence, Elscint has developed a unique feeding system for feeding of Half Bearings of various sizes. Half Bearings of upto dia 90 mm

Learn More

Innovative Usage of Vibratory Bowl Feeders – Automatic Riveting Machine

28 February, 2012

One innovative use of vibratory bowl feeders is to use them for automating riveting machines. Here the rivets are fed through a vibratory bowl feeder to the riveting station. The other part (spring, strip etc.) can either be placed manually or automatically from another vibratory bowl feeder. Alternatively, the strip can be fed through a

Learn More

Innovative Usage of Feeders – Rotary Feeder for feeding of Coins

11 February, 2012

Elscint Automation has developed a innovative Rotary Feeder for feeding of coins. Various Coins having different thickness and diameters can be fed through the same Rotary Feeder with slight changeover tooling. The Rotary Feeder has a rugged design and is made in cast iron and lined with suitable material for better rigidity. An AC geared

Learn More

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8