18 May, 2018
Elscint recently supplied seven vibratory bowl feeders for a multinational company having locations at 3 places in India for feeding of Flare Nuts to their Flaring Machines. Most flare nuts are having the across flat and threading size same (10 mm) and the across corner is 11 mm. Lengths differ. The requirement is to get
5 May, 2018
Elscint recently supplied five vibratory bowl feeders for a special application. In fact this was a third repeat order, the previous one for five and eight bowl feeders were delivered in 2014 and 2017 respectively. As all the earlier supplied bowl feeders have been working without any problem for the last 4 years, the customer
25 April, 2018
Elscint recently manufactured and exported a set of two vibratory bowl feeders along with a spare bowl to Norway. It was for an old customer of Elscint, who has purchasing similar bowl feeders from Elscint since 2012 on a regular basis. It was for feeding rollers having diameter 9 mm x 15 mm length. The
18 April, 2018
Elscint recently manufactured a vibratory feeding systems for feeding of nuclear pallets to a centerless grinding machine. The pellets were having diameter 14 mm to 16 mm and length too varied between 15 mm to 18 mm. Handling of nuclear pellets is hazardous for the operator and hence the customer wanted to automate his process.
9 April, 2018
Elscint recently completed an order for a double head Automatic Tapping Machine. There were three different components which required tapping. The tap pitch was different for each of these 3 components. Additionally, each of the components required left hand and right hand tapping. All these changeovers were required to be done in the same machine.
31 March, 2018
Many times there are cases where one is faced with a situation of having an old bowl feeder which is not working properly and feels that the cost involved to replace the same is not justified. However, as we at Elscint always say, the earlier you replace your old, non-performing bowl feeder with an Elscint
18 March, 2018
Elscint recently manufactured a vibratory bowl feeder for feeding of springs in four outlets. The wire diameter being small, these springs had a tendency of getting entangled between themselves. However, Elscint designed the bowl in such a way that the entangled springs fell back into the bowl and got disentangled while falling down. Only single
7 March, 2018
Elscint recently manufactured a set of three Vibratory Bowl Feeder for feeding of three separate plastic parts, namely, cap, plunger and barrel. There were part of a syringe and the customer required automatic feeding for his assembly line where the syringe was filled and packed. As the dimensions of each of the parts were different,
25 February, 2018
Elscint recently completed a project where in the requirement was for feeding of small metal caps having diameter 10 mm x 12 mm height in a vibratory bowl feeder in two rows. The orientation required was rolling in such a way that the open side of the caps was to face each other. A gravity
18 February, 2018
Elscint recently manufactured and supplied a vibratory bowl feeder for feeding of metal split dowel pins. The diameter of the dowel pin was dia 3 mm x 25 mm length. It was split on one side with the cut being 1 mm. The problem in such cases is that such pins get into each other.